About me

Introduction	ENIGMA III RIG: SHUNYATA RESEARCH HYDRA V-RAY VERSION II (Power distribution, conditioner and filter) RCM: Clearaudio Smart Matrix TURNTABLE: Dr. Feickert Woodpecker TONEARM: Reed 3Q 10,5" (Armwand Pernambuco, Headshell with VTA and Azimuth laser adjust.) CARTRIDGE: My Sonic Lab Ultra Eminent EX MC PHONO STAGE: NAGRA VPS (Tube phono stage, charged to 470 ohm ) ADC SYSTEM: Lavry Black AD11 external USB 2.0 ADC CABLES: ELEMENT 47 SOUNDSTAGE ( TS/RCA Cardas Adapters) SYNERGISTIC Research USB Active SE Cable with Enigma Tuning Circuits Furutech G-314AG-18 High performance Power Cable (4 power cables total) RIPPING NOTE: No Equalization, Minor ClickRepair (whenever possible), No Noise Reduction and No Normalization.No silence been removed. THE DYNAMIC RANGE OF THIS CAPTURE WAS NOT ALTERED IN ANY WAY DURING EDITING. The two channels have been captured at the same volume level with my ADC system. The imbalance between channels, so you can appreciate, it's own vinyl or behavior of my phono preamp to valves. No two valves are identical. In addition, the azimuth of my tonearm-cartridge is perfectly checked by the device Fozgometer, being the difference between channels of ±0,2 db

Introduction

ENIGMA III RIG: SHUNYATA RESEARCH HYDRA V-RAY VERSION II (Power distribution, conditioner and filter) RCM: Clearaudio Smart Matrix TURNTABLE: Dr. Feickert Woodpecker TONEARM: Reed 3Q 10,5" (Armwand Pernambuco, Headshell with VTA and Azimuth laser adjust.) CARTRIDGE: My Sonic Lab Ultra Eminent EX MC PHONO STAGE: NAGRA VPS (Tube phono stage, charged to 470 ohm ) ADC SYSTEM: Lavry Black AD11 external USB 2.0 ADC CABLES: ELEMENT 47 SOUNDSTAGE ( TS/RCA Cardas Adapters) SYNERGISTIC Research USB Active SE Cable with Enigma Tuning Circuits Furutech G-314AG-18 High performance Power Cable (4 power cables total) RIPPING NOTE: No Equalization, Minor ClickRepair (whenever possible), No Noise Reduction and No Normalization.No silence been removed. THE DYNAMIC RANGE OF THIS CAPTURE WAS NOT ALTERED IN ANY WAY DURING EDITING. The two channels have been captured at the same volume level with my ADC system. The imbalance between channels, so you can appreciate, it's own vinyl or behavior of my phono preamp to valves. No two valves are identical. In addition, the azimuth of my tonearm-cartridge is perfectly checked by the device Fozgometer, being the difference between channels of ±0,2 db