Delete comment from: Ken Shirriff's blog
Hi Ken,
Great library I am enjoying working with it. I am however stumped at the moment I am trying to make a network attached IR remote using A X-Board Relay (Leonardo compatable) http://www.dfrobot.com/index.php?route=product/product&product_id=837#.URDbhfKTXKc
The two relays operate a tv lift and then the TV is operated by sending raw data using your IR Library. My IR codes work normally (using a push button) but when I add ethernet the TV IR codes are incorrect it seems to only change the channel up any ideas as to what the problem could be. The relays work but they are also changing the channel up. Any ideas would be appreciated.
Feb 5, 2013, 5:27:37 AM
Posted to A Multi-Protocol Infrared Remote Library for the Arduino