Delete comment from: Ken Shirriff's blog
I am trying to use a Leonardo to control a JVC camcorder. I seem to be having SEND problmes. The RECEIVE puts up the expected FB85 and FB05 like clockwork. But the IR LED (or a substitute red LED) never even flicker. I tested the IR LED on a simple circuit and viewed through a cell phone camera, so it works great. I am connecting the IR LED through port 3 the PWM.
I am confused by the comments of "PWM on 13" or "#define TIMER_PWM_PIN 10" but I tried moving the jumper from 3 to 13 or to 10. I also edited #define TIMER_PWM_PIN 13 to 10 in IRremoteInt.h and tested the LED jumper in 3, 13 and 10 without success. In 13 I get a constant flicker, and to test if that was just the nature of port 13 i changed the delayMicroseconds from 50 to 5000, and the flicker seems unimpressed.
Mar 27, 2013, 7:52:50 AM
Posted to A Multi-Protocol Infrared Remote Library for the Arduino