Delete comment from: Ken Shirriff's blog

Lauszus said...

@AleXX®
It look like your marks a bit shorter than what the code were design for.
Try setting PANASONIC_BIT_MARK to 450 (https://github.com/TKJElectronics/Arduino-IRremote/blob/master/IRremoteInt.h#L126) and see if it works.
You could also try to increase the tolerance (https://github.com/TKJElectronics/Arduino-IRremote/blob/master/IRremoteInt.h#L140).

Regards
Lauszus

May 4, 2012, 7:40:02 PM

Posted to A Multi-Protocol Infrared Remote Library for the Arduino