Post a Comment On: Fawcett Avenue Conscripts

[Image]Aerial intel showing a disturbing preliminary buildup of 10mm WW2 Russians in my kitchen...is another project looming???
The 11th edition of Curt's Analogue Hobbies Painting Challenge has just concluded. Participants often have a flurry of submissions coming through at the last moments - many of these you have seen on the pages of this blog as well, excellent work by Dallas, Dave and Mike! I am no exception with regard to AHPC cramming - there were a few different projects, new and otherwise, lingering at the corner of my painting table, and I finished off different bits to get them submitted.  Here is one of these final submissions, a WW2 "Soviet Sampler" of 10mm products from Pendraken. [Image]Light T-70 tanks on 50mm square bases - T-34s can be seen behind.

These figures are based with some particular logic in mind - the game "Spearhead", a set of division-level WW2 rules by Arty Contliffe . I wanted to re-build the collection necessary to play this amazing game, and at first set out to do so using 3mm figures. Alas, while I love painting the 3mm tanks, I find little or no motivation to paint 3mm infantry...so I thought I would try again, this time using the excellent 10mm figures from Pendraken.[Image]3-man stand represents an SMG platoon...will need many, many more of these bases to represent the tank riders.

[Image]Battalion command out front, pair of rifle platoons, and an assortment of heavy weapon teams in behind - three maxim guns, and three medium mortars.

The "Spearhead" rules work best with square basing - each base representing a platoon (or gun battery etc.). The infantry elements are based on the traditional 1.25" squares, while the vehicles are based on 50mm squares. My hobby lizard brain likes to have consistent basing for "Spearhead" if possible, but the 10mm vehicles will not fit on 1.25" squares...and regardless, tanks and armoured vehicles should take up more space than infantry elements on the table. This was meant as an experiment, and I was pleased with the results.[Image]A Zil truck...one thing you end up needing a lot of in some Spearhead games is trucks...this one is just a start...would be carrying engineers and other assets to keep pace with the armour.

The elements with round bases represent the command units...the larger/more crowded the base, the more "senior" the command element. In a typical Spearhead game there will be a number of battalion and brigade/regiment command elements involved. 
[Image]Brigade commanders debate the relative merits of Soviet politics on a break from their armoured car...

Spearhead games have many, many elements to paint...what you see here would represent the main elements of a 1943-ish Soviet tank brigade, mixing companies of lighter T-70 tanks with heavier T-34s. The brigade included a motor rifle battalion, although the infantry components you see here would be well-short of the actual battalion strength. 
[Image]Early-model T-34s...you can see some later-model versions behind them.

Once more, I am very pleased with the products from Pendraken! Their range is quite comprehensive, and I really, really like their stuff. Of course, I meant to get much more of it finished during this edition of the AHPC, but...well, you know how it goes. Anyway, something to perhaps watch for during the next edition of the Challenge? [Image]Another view of the massing Russian armour.
Whether during the Challenge or otherwise, I will be starting to add to this collection, looking forward to a game of Spearhead sometime in the future. Thanks for reading everyone, and stay tuned for a few more posts about final AHPC XI entries.