Post a Comment On: Arcade and Video Game Modding

Hey,

 I was just making an  DIY Acryl Custom Fight Stick and took some pics while assembling the parts.

Parts
- Acryl Parts
- 8 pcs M4 screw nut and M4 16mm flathat screws for the walls
- 9 pcs M4 25mm flathat screws for top and bottom assembly. 5 pcs M4 12mm distance holder to connect the parts.   
- 2 pcs M3 20mm plus M3 screw nut for USB plug
- 4 pcs M4 16mm plus screw nut for joystick assembly


[Image] 
[Image]  CPO is made of 1,5mm strong aluminium.

[Image]  Side parts are made of 8mm strong acryl, 4 pcs on each side.
[Image]
[Image]
[Image]
[Image]
[Image]  Double side walls for putting paper artwork between them.

[Image]
[Image]
[Image]
[Image]
[Image]  Screw connection
[Image]
[Image]  Sega Button Layout.

[Image]
[Image] Complete package contains 4 feet, harness, 8 buttons 30mm, 3 pcs 24mm, stick unit, Dual Strike and USB Cable.