Post a Comment On: Arcade and Video Game Modding

Hey,

so, I think it`s to get into those arcade stuff. First love was ghost'n goblins.

[Image]
Ok, buied the PCB from AZ and it arrived with a Konami Adapter, But my Cab is Jamma. Nervertheless before starting soldering I cleaned the PCB.
[Image]
The I de-soldered the Konami Adapter



[Image]
weeks later I`ve soldered the jamma adapter. Here`s the pinput of the Ghost`n Goblins PCB


[Image]
One of the dip switches was gone. So I soldered a switch to the pins of the DIP bank. Ok, now I`m able to put the game into freeplay mode again. Here`re the dip settings. In this doc the DIP banks are swapped. Take care the DIP bank 1 is DIP bank 2.

[Image]
I`ve soldered some aligator clips on the 5V and GND lines to make lifer easier. I`ve nearly shortened the PCB by adjusting the voltage. It helps a lot!

[Image]
hehe, only a video from youtube ;)
[Image]
this here is the original on my hellomat superstart cab.

[Image]and here some strange stuff. Does anybody know how to get rid of this grahpic bug?